Harmonic Gearbox Driver Model Hmcg-II-E

• Application: Machinery, Agricultural Machinery, Car, Robot
• Hardness: Hardened Tooth Surface
• Installation: Horizontal Type
• Layout: Coaxial
• Gear Shape: Cylindrical Gear
• Step: Single-Step
• Model NO.: HMCG-14-ll-E
• Type: Gear Reducer
• Model Number: Hmcg-II-E
• Model: 14-40
• Reduction Ratio: 50-120
• Application Scenario: Aerospace
• Application Field: Semiconductor Equipment
• Transport Package: Foam Carton Packing
• Origin: Shenzhen
• HS Code: 84834020
• Production Capacity: 150, 000 Per Year

Product Description

Product Description

HMCG-II-E Series Harmonic Reducer



 

HMCG-II-E Series Harmonic Reducer

 

The HMCG-II-E series harmonic reducer utilizes an input shaft connected to the wave generator inner hole through a cross slider coupling. It is commonly used with rigid wheel end fixed and flexible wheel end output connection modes. Currently available in production specifications ranging from 14 to 40 across the full series. Mainly used in high precision fields such as aerospace, robotics, semiconductors, power inspection, and automation equipment.

 

Principle of Harmonic Gear Transmission

 

The harmonic gear drive was invented by the American inventor C.W.Musser in 1955. It is a new transmission mode using the elastic deformation of flexible working components to carry out movement or power transmission. It breaks through the mode of mechanical transmission using rigid components and uses a flexible component to achieve mechanical transmission. Thus, a series of special functions that are difficult to achieve with other drives are obtained. Because the deformation process of the intermediate flexible component is basically a symmetrical harmonic, it is named. In addition to the Soviet Union called this transmission waveform drive or flexible wheel drive, the United States, Britain, Germany, Japan and other countries are called "harmonic drive".

 

Harmonic Deceleration Principle

 

The deceleration principle of harmonic gear transmission refers to the use of the relative motion of the flexwheel, rigid wheel, and wave generator, mainly the controllable elastic deformation of the flexwheel to achieve motion and power transmission. The elliptic CAM in the wave generator rotates in the flexwheel so that the flexwheel deforms. When the flexwheel teeth and rigid wheel teeth at both ends of the long axis of the elliptic CAM of the wave generator are engaged, the flexwheel teeth at both ends of the short axis are detached from the rigid wheel teeth. The teeth between the long axis and the short axis of the wave generator are in a semi-meshing state that gradually enters the snapping along different sections of the perimeter of the flexwheel and the rigid wheel, which is called the snapping; In a semi-meshing state that gradually withdraws from engagement, it is called snapping out. When the wave generator continuously rotates, the flexwheel constantly deforms, so that the two wheel teeth in the biting, meshing, biting out, and disengaging four kinds of motion constantly change their original working state, resulting in the wrong tooth movement, to achieve the active wave generator to the flexwheel movement transmission.

 

Product Parameters

Model	Reduction ratio	Rated torque at input 2000r/min	Permissible peak torque at start/stop	Permissible max.value of ave.load torque	instantaneous permissible max.troque	Permissible max.input rotational speed	Permissible ave.input rotational speed	Backlash(arc sec)	Transmission accuracy(arc sec)
		Nm	Nm	Nm	Nm	r/min	r/min	≤	≤
14	50	7	23	9	46	8000	3500	20	90
	80	10	30	14	51			20	90
	100	10	36	14	70			10	90
17	50	21	44	34	91	7000	3500	20	90
	80	29	56	35	113			20	90
	100	31	70	51	143			10	90
20	50	33	73	44	127	6000	3500	20	60
	80	44	96	61	165			20	60
	100	52	107	64	191			10	60
	120	52	113	64	161			10	60
25	50	51	127	72	242	5500	3500	20	60
	80	82	178	113	332			20	60
	100	87	204	140	369			10	60
	120	87	217	140	395			10	60
32	50	99	281	140	497	4500	3500	20	60
	80	153	395	217	738			10	60
	100	178	433	281	841			10	60
	120	178	459	281	892			10	60
40	50	178	523	255	892	4000	3000	10	60
	80	268	675	369	1270			10	60
	100	345	738	484	1400			10	60
	120	382	802	586	1530			10	60

 

Detailed Photos

 

Company Profile

 

Suzhou Yijiaang Automation Technology Co., Ltd

 

Established in 2018, Suzhou Yijiaang Automation Technology Co., Ltd specializes in transmission components. Our main products include:

 

• Planetary reducer


• Harmonic reducer


• RV reducer


• DD motor


• Linear motor


• Linear module


• Rotary spline screw


• Hollow rotary platform


• CAM splitter


 

 

These products are widely used in CNC machine tools, packaging machinery, printing machinery, automation equipment, joint robots, medical equipment, AGV, and more. Our company is committed to providing quality products and services, focusing on technological innovation and customer satisfaction.

 

With a dedication to continuous improvement, we strive to deliver value through our core principle of quality. Our goal is to achieve professional perfection and make a global impact in the field of transmission products technical services.

FAQ

Product Description


 

Choosing the Right Gearbox/Speed Reducer

 

When selecting a gearbox or speed reducer from Suzhou Yijiaang Automation Technology Co., Ltd, providing the motor drawing with parameters is the best way to ensure the most suitable model is recommended by our engineers. Alternatively, you can also provide the following specifications:

 

• Type, model, and torque


• Ratio or output speed


• Working condition and connection method


• Input mode and input speed


 

 

By supplying this information, you can guarantee that you receive the perfect gearbox or speed reducer for your needs.